A first turf install can feel like a black box. In practice, crews follow a steady sequence on nearly every job, with a few extra steps on Golden lots that slope or sit on heavy clay. Here is how a typical install unfolds, stage by stage, so you know what to expect.
What happens on artificial turf installation day in Golden?
The crew marks the area, strips grass and soil, caps sprinklers, then builds and compacts a crushed rock base graded to carry rain and snowmelt away. On sloped Golden lots, that grading takes extra care. Next the turf is rolled out with every fiber leaning one way, seams are joined, edges are fastened and infill is brushed in. Small yards may wrap up in a day and larger ones take a few. Clearing the yard, unlocking gates and planning pets and parking in advance keeps the work moving.
First Morning: Marking and Digging Out
The crew shows up, walks the property with you and outlines the turf area with paint or flags. Sprinkler heads and lines get located, and buried utilities should already be marked. Then digging begins: a sod cutter slices up the grass and the crew pulls out a few inches of soil.
Sod and soil go into a trailer or dump truck. Heads inside the turf area are capped, and the crew checks grade so the finished turf will sit at the right height beside patios and walks.
Spreading and Compacting Rock
The base comes next. Crushed rock is wheeled in and spread over the dug out area, raked smooth and shaped with a slight fall for drainage, then compacted with a plate compactor. The process may repeat in lifts until the base is firm and even.
This stage takes patience and should not be hurried. A firm, well graded base keeps turf flat and lets water drain through freeze and thaw. Some crews lay a weed barrier here, depending on the site and product.
Rolling Out Turf and Finishing Up
Rolls are spread across the base with every fiber leaning the same way so the color stays even. Where rolls meet, the crew aligns the edges and joins them with seam tape and adhesive. The turf is trimmed along the borders and fastened around the perimeter.
Last, infill is spread over the surface and worked in with a power broom, which also lifts the fibers and hides the seams. The crew cleans up, hauls away leftovers and walks the finished yard with you.
Once the Crew Is Gone
Let the infill settle for a few days and brush any spots that look flat. Keep heavy furniture off new seams for a little while. If you are planning an install, we can put you in touch with an independent turf provider close by working in Golden.
